STORMSHIELD HIGH PERFORMANCE RENDER SYSTEM - APPLICATION

Apply Stormshield High Flex Basecoat to suitably prepared masonry substrates.

Bed reinforcing Stormshield Mesh Cloth into Basecoat.

Apply second pass of Basecoat to enclose Stormshield Mesh Cloth and to a total thickness of 10mm and work to a plain faced finish.

Apply 1 coat of Stormshield Silicone Enhanced or Full Silicone Primer to fully cured Basecoat and allow to dry.

Apply Stormshield Silicone Enhanced or Full Silicone Render in the aggregate size chosen and finish with a plastic float.

Apply Stormshield High Performance Basecoat to suitably prepared masonry substrates.

Bed rainforcing Stormshield Mesh Cloth into Basecoat.

Apply second pass of Basecoat to enclose Stormshield Mesh Cloth and a total thickness of 10mm and finish with a horizontal keyed finish.

Apply Stormshield Dash Receiver to a thickness of 6mm to 8mm in a colour of your choice.

Apply Stormshield approved Dashing Aggregate.

Apply Stormshield High Performance Basecoat to suitably prepared masonry substrates.

Bed reinforcing Stormshield Mesh Cloth into Basecoat.

Apply second pass of Basecoat to enclose Stormshield Mesh Cloth and a total thickness of 10mm; finish with a horizontal keyed finish.

Apply chosen brick slips using High Performance Brick Slip Adhesive.

Point slips with High Performance Pointing Mortar.

Apply Stormshield High Performance Basecoat to suitably prepared substrate.

Bed reinforcing Stormshield Mesh Cloth into Basecoat.

Apply second pass of Basecoat to enclose Stormshield Mesh Cloth and a total thickness of 10mm; finish with a horizontal keyed finish.

Apply Stormshield Brick Effect Render to a thickness of 5-6mm in the colour chosen for the mortar coat.

Apply Stormshield Brick Effect Render at 2-3mm in the brick face colour chosen and cut brick face colour in desired pattern to expose mortar coat and create desired finish.